FERO SPACE2 & FERO SPACE2 LITE FACTORY SIGNED FIRMWARE

SlarryTech October 22, 2019

On this page, you will find the direct link to download the FERO SPACE2 and FERO SPACE2 LITE FACTORY SIGNED firmware/Stock Rom.

If you are an experienced software repair engineer, you can go straight to the download button that is at the end of the post to so as to save time. However, if you new or upcoming technician you should consider reading the whole post so as to avoid unnecessary damage or bricks.

Requirement before flashing for flashing

FERO SPACE2 and FERO SPACE2 LITE Factory firmware

✔️The device firmware

✔️The chipset flash tools

✔️The chipset or device driver

✔️Good USB cable

✔️Your computer

Procedure for flashing FERO SPACE2 and FERO SPACE2 LITE

✔️Install Winrar Software in your Computer or Laptop, if already installed THEN DOWNLOAD the factory signed firmware/Stock Rom for flash file from the link provided below

✔️Extract to as you like path better is desktop for easy understanding

✔️Open SWD Flash Tool folder and choose file and open it

✔️Choose Click Scatter-loading button and select txt

NOTE-If DEVICE is dead or does not detect then try with Volume UP button and Insert USB cable (Note: you can use the Volume Down button also for detecting not working Up key)

Wait until the finished process, do not try to unplug the device while in flashing mode

CONGRATS you have successfully flash FERO SPACE2/FERO SPACE2 LITE Factory firmware/Stock Rom

To download the firmware that matches with your device, ensure you check the Build -Number

Read the Build-Number with miracle box